CNC Machining

Toolmaking

Other Services

Materials Used

• Dedicated to Customer Service
• Total Professional Approach
• Committed to Quality and Delivery Performance
• Excellent Knowledge Base
• We work with you as well as for you

CNC Machining

Turning

Our CNC Turning facility comprises of 5 axis turn/mill up to 480mm diameter. We have both automatic magazine bar feed and bar pull for repetitive cycle work and can accommodate up to 70mm through the spindle.
 
Typical turning accuracy of .01mm is regularly achieved and with 12 station turrets a multitude of both turning, axial or radial milling or drilling work can be done in one operation with good repeatability.

We are able to perform constant surfacing up to 5000 RPM which allows us to confidently cut small diameters on both plastics and aluminium alloys.

Twin turret machining allows us to perform concurrent machining operations thus reducing cycle times

Mill Turning

It is important to do as much work as possible within a single set up and with two large CNC lathes with a mill/drill facility we are able to maintain a competitive edge on those products that traditionally had to go through a number of machining operations.
 
We have both positional C axis down to 0.1 degrees integral C axis that enables us to cut complex radial and axial shapes. These machines have 2 1.2” spindle bores and we have magazine bar feed which enables a “lights out” running state.

Milling

We are able to offer 4th axis CNC Machining with up to 20 position BT40 automatic tool changing and a working area of upto 1020mm x 510mm x 540mm.
 
This facility offers helical milling and thread milling and with spindle speeds up to 6000RPM and repeatability to +/- 0.005mm we are able to be competitive on most applications presented to us.